Product features:
The electrode is an indispensable and lossy material on the optical fiber fusion splicer and needs to be replaced regularly. This is also one of the daily maintenance tasks of the optical fiber fusion splicer. Therefore, it is one of the skills of users of fiber fusion splicers to determine when electrodes need to be replaced and how to change electrodes.
Precautions
When replacing the electrode, first of all, you must confirm that the fusion splicer is shut down, remove the protective cover of the electrode chamber, loosen the screw fixing the upper electrode, take out the upper electrode, then loosen the top wire of the lower electrode, take out the lower electrode, and secondly, To install a new electrode, the operation steps are reverse to the method of disassembling the electrode, just operate in sequence. The gap between the two electrodes is required to be 2.6 plus or minus 0.2 mm. During the assembly process, do not touch the tip of the electrode to prevent damage to the electrode and prevent the electrode from falling into the machine and causing damage. After replacing the electrode, the arc position should be calibrated.
Maintenance
As a special precision instrument, the fusion splicer should always be avoided as much as possible to avoid excessive vibration, but also waterproof and moisture-proof, you can put a desiccant in the case, and put it in a dry and ventilated place when not in use
